（chick it refractory bricks products） The molds used for compression molding are all made of metal, The forming mold has a great influence on the quality of refractory bricks products. The influence of mold on the quality of refractory bricks products. If the hardness of the part contacting the mold and the blank is not…
Introduction With the increase of the production ratio of high-quality steel in the ladle, the ladle has become one of the important equipment for refining outside the furnace [1], which is responsible for more and more refining tasks outside the furnace. This problem has plagued more and more steel mills. The ladle sticky slag mainly…
Tundish Because the start and stop of the continuous casting machine affect the converter and continuous casting productivity, and the billet and tail generated during the start and stop of the continuous casting machine affect the molten steel metal yield and the cost of steel consumption per ton, how to greatly increase the life of…
Product Description Typical Properties of UHP Graphite electrode Applicable Furnace Property AC Furnace DC Furnace 300-400mmm 12”~16” 450-500mm 18”~20” 550~600mm 22”~24” 600~700mm 24”~28” Bulk Density g/cm³ 1.65-1.76 1.64-1.75 1.64-1.75 1.64-1.75 Specific Resistance μΩm 4.2-6.0 4.2-6.0 4.2-6.0 4.2-5.5 Elastic Modulus Gpa 7-14 7-14 7-14 7-14 Kgf/mm² 700-1400 700-1400 700-1400 700-1400 Flexural Strength Mpa 10.5-15 10-15…
Product Description Typical Properties of UHP Graphite electrode Applicable Furnace Property AC Furnace DC Furnace 300-400mmm 12”~16” 450-500mm 18”~20” 550~600mm 22”~24” 600~700mm 24”~28” Bulk Density g/cm³ 1.65-1.76 1.64-1.75 1.64-1.75 1.64-1.75 Specific Resistance μΩm 4.2-6.0 4.2-6.0 4.2-6.0 4.2-5.5 Elastic Modulus Gpa 7-14 7-14 7-14 7-14 Kgf/mm² 700-1400 700-1400 700-1400 700-1400 Flexural Strength Mpa 10.5-15 10-15…
Product Description Typical Properties of UHP Graphite electrode Applicable Furnace Property AC Furnace DC Furnace 300-400mmm 12”~16” 450-500mm 18”~20” 550~600mm 22”~24” 600~700mm 24”~28” Bulk Density g/cm³ 1.65-1.76 1.64-1.75 1.64-1.75 1.64-1.75 Specific Resistance μΩm 4.2-6.0 4.2-6.0 4.2-6.0 4.2-5.5 Elastic Modulus Gpa 7-14 7-14 7-14 7-14 Kgf/mm² 700-1400 700-1400 700-1400 700-1400 Flexural Strength Mpa 10.5-15 10-15…
Product Description Typical Properties of UHP Graphite electrode Applicable Furnace Property AC Furnace DC Furnace 300-400mmm 12”~16” 450-500mm 18”~20” 550~600mm 22”~24” 600~700mm 24”~28” Bulk Density g/cm³ 1.65-1.76 1.64-1.75 1.64-1.75 1.64-1.75 Specific Resistance μΩm 4.2-6.0 4.2-6.0 4.2-6.0 4.2-5.5 Elastic Modulus Gpa 7-14 7-14 7-14 7-14 Kgf/mm² 700-1400 700-1400 700-1400 700-1400 Flexural Strength Mpa 10.5-15 10-15…
Product Description Typical Properties of UHP Graphite electrode Applicable Furnace Property AC Furnace DC Furnace 300-400mmm 12”~16” 450-500mm 18”~20” 550~600mm 22”~24” 600~700mm 24”~28” Bulk Density g/cm³ 1.65-1.76 1.64-1.75 1.64-1.75 1.64-1.75 Specific Resistance μΩm 4.2-6.0 4.2-6.0 4.2-6.0 4.2-5.5 Elastic Modulus Gpa 7-14 7-14 7-14 7-14 Kgf/mm² 700-1400 700-1400 700-1400 700-1400 Flexural Strength Mpa 10.5-15 10-15…
Aluminum carbon brick belongs to the range of aluminum carbon refractory materials. The so-called aluminum-carbon refractory refers to the carbon composite refractory formed by combining alumina raw materials and carbon raw materials, and in most cases, other raw materials such as silicon carbide and metal silicon, bonded with an organic binder such as asphalt or…
Refractories are ceramic materials designed to withstand the very high temperatures (in excess of 1,000°F [538°C]) encountered in modern manufacturing. More heat-resistant than metals, they are used to line the hot surfaces found inside many industrial processes. In addition to being resistant to thermal stress and other physical phenomena induced by heat, refractories can withstand…